MOTOREX COOL-X is a ready-to-use coolant with corrosion protection for high-performance spindles.
The ingredients passivate the various materials and protect them against corrosion in the long term. COOL-X is a very efficient coolant with a specific heat of 4.1 J / g-K, which is almost as good as that of water (4.187 J / g-K).
Characteristics
	
Ready to use
	
Very efficient
	
Heat dissipation
	
Prevents electrochemical corrosion
	
Effectively protects aluminum, nonferrous and ferrous metals against corrosion
	
Galvanized parts are not attacked
	
Low maintenance
	
Compatibility with the plastics and sealing materials commonly used in mechanical engineering tested and confirmed
	
Volume: 25L canister
	
Also available as: 60L, 198L barrel
Application
	
COOL-X is ready to use, 11% concentration. do not add any water.
	
An average operating temperature of 20 - 25 ° C is very effective in protecting elastomers in the long term.
	
If the conditions of use are optimal and the instructions for use are complied with, the coolant can remain in use for up to 2 years storage Store the MOTOREX COOL-X closed in the original container at 5 - 35 ° C.
	
In general, MOTOREX COOL-X should not be exposed to temperatures below 0 ° C.
	
It freezes at a temperature of - 9 ° C.
	
If the MOTOREX COOL-X is exposed to frost during transport and freezes, it can reach temperatures of min. + 5 ° C can be thawed again.
	
Make sure that the liquid is completely thawed.
	
Shake the container well after thawing.
	
The max. storage time in the closed original container is 1 year.
Maintenance
	
COOL-X must be checked periodically in accordance with the specifications of the spindle or machine manufacturer (please note the maintenance instructions on the back).
	
If a third-party product is to be replaced by COOL-X, the cooling system must be replaced with 3% CS-CLEANER for 48 operating hours be treated.
	
Please note the maintenance instructions of the spindle manufacturer.
Note: You can find the Motorex CS Cleaner here !
Technical specifications
	
​Color (DIN ISO 2049): fluorescent green
	
Density at 20 °C  (ASTM D 4052): 1.010 g/ml
	
PH value range (DIN 51785): 8.0 - 8.7
	
Solidification point (ASTM D 5950): -9 °C
	
Application range: 4 - 80 °C
	
Reading value of refractometer:  *1.9 % Brix-1
	
Water hazard class: WGK1
	
Disposal code: VeVA / EWC 120109